June 11, 20169 yr 2 hours ago, Hopefulflyer389 said: Awesome guns make you want to excessively pull the trigger. Errr..., sts?
June 12, 20169 yr 1 hour ago, brickhistory said: Errr..., sts? I'm going to catch flak for this, but you'll have to clarify sts. Still learning.
June 12, 20169 yr Ah youngens. For now, Urban Dictionary has the answers you seek. https://www.urbandictionary.com/define.php?term=so to speak https://www.urbandictionary.com/define.php?term=pull the trigger I'll let you figure out which definitions apply.
June 12, 20169 yr 1 hour ago, Hopefulflyer389 said: I'm going to catch flak for this, but you'll have to clarify sts. Still learning. WTF?
June 12, 20169 yr 1 hour ago, nunya said: Ah youngens. For now, Urban Dictionary has the answers you seek. https://www.urbandictionary.com/define.php?term=so to speak https://www.urbandictionary.com/define.php?term=pull the trigger I'll let you figure out which definitions apply. Thank you.
July 6, 20169 yr One step forward...two steps back. Thanks Shipmate. https://wtop.com/fairfax-county/2016/07/video-appears-to-show-navy-official-pointing-gun-at-people-in-fairfax-co/ ATIS
July 6, 20169 yr 1 hour ago, ATIS said: One step forward...two steps back. Thanks Shipmate. https://wtop.com/fairfax-county/2016/07/video-appears-to-show-navy-official-pointing-gun-at-people-in-fairfax-co/ ATIS How in the fuck is he not in jail?!? I guess Clinton isn't the only one with a golden goose... And lastly, but far from least, get your finger off the fucking trigger!
July 7, 20169 yr 15 hours ago, M2 said: How in the is he not in jail?!? I guess Clinton isn't the only one with a golden goose... And lastly, but far from least, get your finger off the ing trigger! Massive amount of UNSAT with this guy. I'm sure his access and clearance will be unaffected though (always willing to be surprised and have to backtrack on that opinion). Little people like us would be looking at paper on our desk and a personal escort out of the building. Cheers ATIS
July 18, 20169 yr https://www.militarytimes.com/story/military/2016/07/14/navy-official-still-not-charged-pointing-gun-3-men/87112866/ This MFer is on paid vacation for this stunt.
July 18, 20169 yr https://ghostgunner.net/ Anyone used one of these? Any input? I have not used one, but I've done some research on them. For what they are, I don't think it's worth it unless you've got a big pile of 80% lowers sitting around and don't already own a router and a drill press. The GG is $1000+, each lower is $50 and they ran into ITAR issues or something that prevented them setting up the forum that they were going to have. If you get one, I'd love to hear how you like it.
July 18, 20169 yr Ref the ghost guns thing: If you like tinkering, you'd probably be better off in the long run buying a decent mill and building a cnc conversion. At least you can sell an actual mill once you get bored with it.
July 18, 20169 yr 9 hours ago, Warrior said: I have not used one, but I've done some research on them. For what they are, I don't think it's worth it unless you've got a big pile of 80% lowers sitting around and don't already own a router and a drill press. The GG is $1000+, each lower is $50 and they ran into ITAR issues or something that prevented them setting up the forum that they were going to have. If you get one, I'd love to hear how you like it. 9 hours ago, busdriver said: Ref the ghost guns thing: If you like tinkering, you'd probably be better off in the long run buying a decent mill and building a cnc conversion. At least you can sell an actual mill once you get bored with it. There are about ten of us in my neighborhood who are interested in forming a gun club and going in to purchase one of these. They are $1500 so that would only be a $150 investment per member. I plan to mill out two AR-15 lowers and two AR-10's for myself....so, from a financial aspect, it works out. I probably wouldn't get much use out of getting a real mill that would do other things. Just got too much $hit to do already without adding another hobby. Just curious if anyone has any experience and could speak to the quality, etc? From what I've been able to find online, it's so easy a caveman can operate it which means there's hope for me. Edited July 18, 20169 yr by HerkFE added words to sound more better
July 19, 20169 yr 16 hours ago, HerkFE said: There are about ten of us in my neighborhood who are interested in forming a gun club and going in to purchase one of these. Be very careful with this; the ATF ruling from about 18 months ago leaves the door open to you getting in a whole heap of trouble if you don't "manufacture" the lower using tools/machinery that you personally own. To wit: https://www.atf.gov/firearms/docs/ruling/2015-1-manufacturing-and-gunsmithing/download Note the overly general terminology in the last section of the document, especially the phrase "unlicensed machine shop".
July 19, 20169 yr 5 hours ago, Hacker said: ...especially the phrase "unlicensed machine shop". WTF? When did we start having to license & register machine tools? [/sarcasm; rhetorical question] I have a friend whose garage is better equipped than the no-shit machine shop at one of my previous employers (a Part 145 Repair Station). He's an IT geek by day, and makes stuff on his lathe & mill (that he converted from manual to CNC) because he likes to make stuff from metal after wrangling 1s and 0s all day. That makes me think it's perhaps not a good idea for me to finish an 80% (or even a 0%) lower in his garage, on his machines, for my use.
July 19, 20169 yr I'll do some more checking on it. I read somewhere that gun clubs bought these and members could use it. Can't remember where I saw it so I don't know how "official" it was.
July 19, 20169 yr I definitely don't want to do anything illegal. Just trying to make my own guns that big brother can't trace. Not sure where the line is drawn in who "owns" the machine. If ten of us split the cost equally and only make our own guns, is that illegal? What if just my dad and I split the cost of the machine and only make our own guns? I'm not arguing here, just wondering....
July 20, 20169 yr Interesting situation. video.foxnews.com/v/5041079038001/warning-graphic-video-fatal-shooting-on-city-bus/?#sp=show-clips ATIS
July 20, 20169 yr 45 minutes ago, Kiloalpha said: Herk, I can see splitting it with a family member or two. But when you start getting into large groups, the line becomes fuzzy. I'd split it with with a brother or best friend (or both), and then basically keep it at the place of the person who "owns" it. He can then give it to you at no cost, "you own it", you keep it at your place and you can "sell" it back... etc. It's the dealing with 10 people that make the dance just too confusing and convoluted. Leave it to the government to make something as simple as the concept of ownership... confusing. I know what you mean. It's just that we are legitimate. I guess my point is where does it legally say that two people can be equal owners, but three can't? Or can three but not four? I realize it's perception but damn.
July 20, 20169 yr On 7/7/2016 at 8:53 AM, ATIS said: Massive amount of UNSAT with this guy. I'm sure his access and clearance will be unaffected though (always willing to be surprised and have to backtrack on that opinion). Little people like us would be looking at paper on our desk and a personal escort out of the building. Cheers ATIS Ended up getting charges for his actions and story was done by Bruce Jenner. https://www.wusa9.com/news/local/burke/navy-official-to-be-charged-for-waving-gun-at-young-men/276971110?ftag=MSF0951a18
July 20, 20169 yr 1 hour ago, Hopefulflyer389 said: Ended up getting charges for his actions and story was done by Bruce Jenner. https://www.wusa9.com/news/local/burke/navy-official-to-be-charged-for-waving-gun-at-young-men/276971110?ftag=MSF0951a18 Had a slight smile on my 0500 coffee chugging sleepy face watching this on the local DC news. Cheers ATIS
August 18, 20169 yr I've been building a semi high end AR, got my Daniel Defense upper, 2 stage match trigger, and parts kit for my lower, got the lower entirely put together except for the pistol grip, the screw to hold to grip was going in really tight so I backed the screw and the hole tapped in the lower is to small, and the screw I started was enough to start its own grooves in the aluminum. What do y'all recommend, getting a tap and tapping it myself or trying to find a machine shop to do it for me? I've never tapped a hole (sts) and I would rather not f**k my $120 lower up. I'm in Cannon so my local business options are limited.
August 18, 20169 yr I had almost the exact same issue...$10 at Home Depot and some patience work perfectly. The biggest piece of advice if you're going to do it yourself...make sure you are constantly backing out the tap and clearing any fouling out or there's a good chance you can snap the tap. And if that happens you're completely SOL. Sent from my iPhone using Tapatalk
August 18, 20169 yr 21 minutes ago, viper154 said: I've been building a semi high end AR, got my Daniel Defense upper, 2 stage match trigger, and parts kit for my lower, got the lower entirely put together except for the pistol grip, the screw to hold to grip was going in really tight so I backed the screw and the hole tapped in the lower is to small, and the screw I started was enough to start its own grooves in the aluminum. What do y'all recommend, getting a tap and tapping it myself or trying to find a machine shop to do it for me? I've never tapped a hole (sts) and I would rather not f**k my $120 lower up. I'm in Cannon so my local business options are limited. Worst come to worst, PM me, we have a Viper bubba out here who does this and is pretty good at it. He might charge a little bit though, but his builds and inventory is epic........and by that I mean, he threw them all into Lake Havasu.
Create an account or sign in to comment