5 minutes ago, Justwanttofly said:

What job did you get selected for? That’s your training dates. Go to your utm and they can look up the code in MILPDS

Pilot.

I talked to my UTM and they have no clue 🤷

I'm concerned its not until next year.

Mine just populated as well. PV4AB LJ with a start date of 21 Dec. UTM is out on leave this week lol

SV8IPT LJ

RNLTD 11 May

IPT Start Date 26 June

Anyone know if I can decode IPT location, or do I have to call?

Man those start dates are brutal (unless that's what you requested). Im still not showing anything yet but at this rate looks like I may be eyeing another reclama.

1 minute ago, LawnmowerofDoom said:

Man those start dates are brutal (unless that's what you requested). Im still not showing anything yet but at this rate looks like I may be eyeing another reclama.

Honestly about what I expected. Summer PCS, Fall IPT into Winter/early next year UPT

2 minutes ago, Shultzy22 said:

Honestly about what I expected. Summer PCS, Fall IPT into Winter/early next year UPT

Oh actually if those are UPT start that's not bad. If that was IPT start it'd be brutal.

So if your class starts with "SV" that is your projected UPT date and the letters on the back end (for example: "LJ") are the first two letters of the base PAS Code which in this case would be Laughlin. Vance would be "VH" and Columbus "CO".

Your IPT class will only have the main UPT base attached. Based on some folks in IPT currently, the two locations for Laughlin are Denton, TX and San Marcos, TX. Only way to find that out is when you are in processing/know someone there who can tell you what location is slotted for that date.

This is where folks earlier in the thread mentioned taking "strategic" leave prior to IPT if you want a specific location that your primary UPT base sends folks to.

So I’m currently driving to Columbus to drop off two of my vehicles about a week ahead of my PCS. But the information that I can pass along is that once your dates get loaded anybody in your CSS shop should be able to look at your MILPDS records and see what training you’re loaded for additionally, if you don’t know what base you got you can do the EFMP hack on VMPF essentially what you do is you start a new application and you go all the way to the end make sure you don’t hit submit and you will see your projected assignment and then once you see that just go ahead and remove your EFMP application. Lastly, from what my experience was, you’re gonna get an email from the transition flight at whatever base you’re going to to let you know that you’ve been scheduled for IPT and it will have the location on it. I know there are locations in Orlando Pensacola Atlanta, Denton, Texas, and San Marcos Texas. I don’t know if they’re still using the ones out in Arizona. Sorry for any typos I’m currently driving and using Siri

35 minutes ago, Shultzy22 said:

So if your class starts with "SV" that is your projected UPT date and the letters on the back end (for example: "LJ") are the first two letters of the base PAS Code which in this case would be Laughlin. Vance would be "VH" and Columbus "CO".

Your IPT class will only have the main UPT base attached. Based on some folks in IPT currently, the two locations for Laughlin are Denton, TX and San Marcos, TX. Only way to find that out is when you are in processing/know someone there who can tell you what location is slotted for that date.

This is where folks earlier in the thread mentioned taking "strategic" leave prior to IPT if you want a specific location that your primary UPT base sends folks to.

So what does it mean if it starts with PV?

If mine is PV4AB CO does that mean my UPT is Columbus?

4 minutes ago, Captainteej said:

So what does it mean if it starts with PV?

If mine is PV4AB CO does that mean my UPT is Columbus?

Affirm

16 minutes ago, LawnmowerofDoom said:

Affirm

Yeah sorry basically any training code that doesn’t have IPT labeled will be your UPT dates

1 hour ago, Echoes said:

SV8IPT LJ

RNLTD 11 May

IPT Start Date 26 June

Anyone know if I can decode IPT location, or do I have to call?

I have the same IPT code/date at Laughlin & was told it would be in Arizona by the UFT board person

5 minutes ago, johnny-cash said:

I have the same IPT code/date at Laughlin & was told it would be in Arizona by the UFT board person

Did you have to ask, and did they specify which one in Arizona? Prescott or Phoenix?

8 minutes ago, Echoes said:

Did you have to ask, and did they specify which one in Arizona? Prescott or Phoenix?

Last week I emailed about not having dates yet & they sent me everything they could see on their end. Also specified that it's Prescott

I just got the email for a 30 Jun IPT date out of Del Rio that was for Prescott. AFPC guy told me that the location changes all the time though due to AETC doing load management/balancing so to take that with a grain of salt.

Sounds like its going to be a cluster until were in the student flights getting ready to go

Edited yesterday at 12:08 AM1 day by Shultzy22

23 hours ago, Shultzy22 said:

So if your class starts with "SV" that is your projected UPT date and the letters on the back end (for example: "LJ") are the first two letters of the base PAS Code which in this case would be Laughlin. Vance would be "VH" and Columbus "CO".

Your IPT class will only have the main UPT base attached. Based on some folks in IPT currently, the two locations for Laughlin are Denton, TX and San Marcos, TX. Only way to find that out is when you are in processing/know someone there who can tell you what location is slotted for that date.

This is where folks earlier in the thread mentioned taking "strategic" leave prior to IPT if you want a specific location that your primary UPT base sends folks to.

Did you happen to mean "SV" is projected IPT date? The education and training course announcements page (url in the RIP I got) shows "S-V8I-PT" as the course ID for the IPT courses and “P-V4A-B" as the ETCA course IDs for UPT.

Edited yesterday at 03:09 PM1 day by JASSM_ER

As far as I can tell there's no info about what IPT location we'll end up at on vMPF with just training dates and a RIP. The ETCA page for SV8IPT has possible IPT locations listed but no info about which dates/classes go with which location. I called the 71 STUS and they said they won't know which classes students are assigned to until 2-3 classes before the current class starts (i.e., if IPT 27-06 just started, the STUS should have just finished the roster for 27-08 and be finalizing 27-09). Mileage may vary by UPT base on this. I have the IPT class schedule-location roster for Vance (though it only has class numbers, not dates) if anyone wants to shoot me a dm with their DoD email I can teams it.

Has anyone else gotten a RIP yet?

Myself and a couple buddies are all still waiting to hear anything. We sent an email last week and got the same busy response other folks had gotten. Debating when I sent a follow up email like hey it's mid-March...

4 hours ago, JASSM_ER said:

Did you happen to mean "SV" is projected IPT date? The education and training course announcements page (url in the RIP I got) shows "S-V8I-PT" as the course ID for the IPT courses and “P-V4A-B" as the ETCA course IDs for UPT.

Yeah I think so. Just got my RIP as well so trying to figure all the things out

S-V8I-PT is the AETC course code for the IPT syllabus. P-V4A-B is the same for the new post-IPT T-6 syllabus (other examples being P-V4A-U for the dead 2.5 T-6 syllabus, P-V4A-M being the XPW syllabus, and F-V5A-F being the T-38C GPT syllabus). If you are showing dates for one or the other, those will either be IPT or UPT start dates based on what the course code that's showing is.

9 hours ago, JASSM_ER said:

Has anyone else gotten a RIP yet?

I was notified for my assignment yesterday, Vance with a RNLTD of early May. My IPT CSD is 5 June. Got my RIP for IPT today. I’ll shoot you a dm you for that class schedule!

Edited 21 hours ago21 hr by rotini24

Well if anyone else is still waiting orders and hasn't attended MFS that is probably why. AFPC got back to me and told me I won't get an assignment until MFS complete, even though I went originally as an RPA Pilot a couple years ago. Was tracking this was not the case so this will be a fun bureaucratic mess to clean up.

Follow up is if you went to MFS (RPA Pilot) but only got cleared for GBO you WILL have to reattend MFS to get cleared up to FC1. If you got cleared up to FC1 when you went originally it should be VFR direct to your UPT base. Since they sent all the folks to Laughlin short notice MFS is backed up so anyone awaiting an assignment may be in limbo until dates at wright patt become available.

Edited 3 hours ago3 hr by LawnmowerofDoom

My buddy who applied to this board but got CSO just got an email that he was offered a fixed-wing pilot slot with a PCS in 2 months and no base. Interesting what's going on with all these people getting slots after the fact